Clean In Place:Configurations | Ultra Flow | Features and Options
Clean Out of Place:Washers
Sani-Matic: Clean In Place: Features and Options

Water Control Assemblies
Each tank is equipped with a top mounted anti-siphon connection. Water lever is controlled throughout operation by conductivity level probes and a water solenoid valve. Pressure-level sensors are available as an option.

Tank
Standard #4 I.D. & O.D. with ID welds color cleaned, heavy gauge T304 stainless tanks feature smooth radius-corners, all-welded construction with panned top and sloped bottom with anti-vortex baffle. Hinged manway cover, skimmer overflow, clamp fittings and heavy duty legs are standard.

Valve/Manifold Arrangements
Standard suction and return manifolds are provided with air-actuated, unpolished open-yoke CIP shut-off valves. Butterfly, diaphragm, or polished open-yoke valve-manifold assemblies are available.

Skid-mounted Frame
The standard CIP unit provides a heavy-duty square-tube frame assembly for tank, pump and panel mounting.

  • Factory piped
  • Factor wired
  • Factory programmed
  • Factory Test

READY TO INSTALL!

Heating Assembly
Heating choices range from in to use of an in-tank steam injection arrangement to a 2-pass u-table shell and tube heat exchanger to provide proper operating materials during the cleaning program. Air operated ball and modulating steam valves may be provided.

Chemical Control Options
Includes pumps for:
(A) Chemical feed directly into the solution tank.
(B) Metered injection into the CIP suction manifold.
In addition,
(C) A programmable conductivity controller can be provided to monitor and control in-tank chemical concentrations and improve final rinse effectiveness.

CIP Control Systems

  • Sani-Matic offers logic controls that are pre-programmed to provide flexibility for multiple wash operations.
  • Complete documentation of the CIP components and controllers is provided in the operation manual.
  • Sani-Matic Systems is a UL listed Industrial Control Panel Manufacturer (Product Category 508) (#E115505).
  • Factory trained personnel for start up service and training.
    Service is always available from the factory, for any Sani-Matic manufactured CIP system.
 
  a powersolution.com site