ReSeal | PureGard | ClearGard | PermaSeal | SaniGard
Sanitary Couplers: PermaSeal

Radial Crimp for Stainless Steel Braided Hose

PermaSeal® radial crimp couplers on smooth bore stainless steel Teflon® braided hose offers the most chemically inert method of transferring fluids in a flexible connection. Our external crimp design provides a uniform fixed seal at the coupler stem to hose junction point that eliminates the possibility of product wicking between the hose and coupler. A Full flow smooth bore passage is created after fabrication that excludes ledges or crevices that can collect bacteria. Assemblies can be steamed in place or autoclaved for high purity applications.

Channel locking components become a single unit that resists separation under severe applications. Internal surface finishes exceed 15 Ra. Each coupling stem is manufactured from 316L grade stainless steel and stamped with a material traceability number which is our pledge of total quality assurance. A wide range of end styles are available in sizes ¼" through 1".

 

*NOT for use with Alkali metals, Aluminum Alkyl, Chlorine, Creosote, Elemental Sodium, Fluorine, Freon TF, Hydrofluoric Acid, Iodoform, Sodium Chlorite Solution, Sodium Metallic. Always check for chemical suitability before installing any Sanitary Couplers products.

WARNING: All PureGard® products pressure ratings are shown at ambient temperature. As temperature increases, working pressures and vacuum ratings will decrease. For assembly applications that exceed 250°F contact factory for recommendations.

Teflon® is a registered Trademark of DuPont

  • Fixed Seal at Stem to Hose Sleeve Junction Point -
    No External Entrapment Areas to Harbor Bacteria
  • Streamline Contour -
    Will Not Injure Workers and Provides Plumbing Ease
  • Channel Locking Components -
    Becomes a Single Unit Fitting, Will Not Separate Under Severe Condition
  • High Grade 316L Material -
    Excellent Chemical Resistance
  • Quality Workmanship -
    Internal Surface Exceeds 15 Ra
  • Provide Excellent Retention -
    Resists Coupling Blow-Off
  • Pin Stamped Part Numbers -
    Permanent Identification, Customizing Available

Accepted by: FDA Title 21 CFR 17.1550 & US Pharmacopoeia Class VI

 
  a powersolution.com site