Sentry® Softwall Discharge Hose

When you need extra flexibility and handling ease, use Sentry® softwall hose. Ultra-lightweight Sentry has been designed exclusively for discharge service. Chemically resistant to mild caustic solutions. Will handle pressures up to 250 PSI. Ideally suited for overhead CIP wash units.

• Tube: White FDA Butyl
• Reinforcement: Two fabric spirals
• Cover: Blue EPDM with yellow stripe
• Temperature: -40° to +225°F continuous (+250°F intermittent)
• Couplers: PermaSeal® permanently installed or ReSeal® reusable

Challenger™ FEP/Teflon® Suction and Discharge Hose

Premium Quality suction discharge hose that meets Pharmacopoeia class VI requirements. Features a smooth FEP lined tube that will not impart taste or odor. Challenger™ hose offers a nonstick, chemically inert tube that can be safely cleaned with open end steam at low pressures. Dual helix with static dissipating wire provides full vacuum, excellent flexibility and added safety when electrical continuity is required.

• Tube: White FDA FEP/Teflon
• Reinforcement: Two fabric spirals with dual wire helix and static wire
• Cover: White EPDM with green stripe
• Temperature: -40° to +325°F
• Couplers: PermaSeal® permanently installed or ReSeal® reusable with stainless steel hose sleeves only.

Protector™ Suction and Discharge Hose

This versatile hose has been carefully engineered to handle a wide variety of product and application requirements. Rated for full suction and discharge service up to 150 PSI. Our unique reinforced fabric spiral and wire helix design gives Protector™ exceptional flexibility for handling ease.

• Tube: White FDA Butyl
• Reinforcement: Two fabric spirals with helix wire
• Cover: Gray or White EPDM with blue stripe
• Temperature: -40° to +225°F continuous (+250°F intermittent)
• Couplers: PermaSeal® permanently installed or ReSeal® reusable

Gladiator® Crush-Resistant Hose

Perfect for High Traffic Areas such as receiving bays or raw product intake stations. Abrasion resistant cover is non-marking. Gladiator® crush-resistant hose features a monofilament helix that allows the hose to spring back to its original shape after being twisted, kinked, or run over by a vehicle. Gladiator® can be safely cleaned with open end steam at low pressures.

• Tube: White FDA Butyl or Synthetic Polymer
• Reinforcement: Multiple fabric spirals with monofilament helix
• Cover: Red EPDM with yellow or white stripe
• Temperature: -40° to +225°F continuous (+250°F intermittent)
• Couplers: PermaSeal® permanently installed or ReSeal® reusable