|
| Toftejorg SaniMega Rotary Spray Head |
Application The Toftejorg SaniMega rotary spray head provides a controlled rotating fan impact cleaning action. It is an automatic device with an optimised design for effective distribution of cleaning media.
The Toftejorg SaniMega is suitable in processing and storage tanks ranging from 50 to 350 m3 (13,000 to 92,000 US gallons). It is particularly suited to vertical storage tanks in the food, brewing and other beverage industries where a scrubbing effect is needed to clean at the fill level. Sizing/selection and installation drawing are available in Alfa Laval CAS tool for Tank cleaning equipment.. Working principle The flow of the cleaning media causes the gear unit to rotate the body of the cleaning head. The resulting fan impact jet provides a swirling action down the tank wall. Spray Pattern 
270° up Standard Design Downpipe length 1,200 mm. Inlet connection as welding end 2” ISO (ø51 x 1.2). Tank inlet as DIN Union DN100. As standard documentation, the Toftejorg SaniMega can be supplied with a “Declaration of Conformity” for material specifications. Materials 1.4404 (316L), PEEK, EPDM Technical Data | Weight: | 6 kg (13 lbs) | | Lubricant: | Self-lubricating with the cleaning fluid | | Working pressure: | 2 - 4 bar (29 - 58 psi) | | Recommended pressure: | 3 bar (44 psi) | | Max. working temperature: | 95 °C (203 °F) | | Max. sterilisation temperature: | 140 °C (284 °F) | | Max. ambient temperature: | 140 °C (284 °F) | | Effective cleaning radius: | 3 m (10 ft) | | Standard connection: | Inlet: 2” ISO clampTank: 3” ISO clamp | | Standard downpipe length: | 1,200 mm (47 inch) | | Min. tank opening: | Ø72.5 mm (3 inch) |
Certificate: 2.1 Ordering Please specify desired spray pattern, required connections, material selection and type of certification required. Please also confirm the application suitability. Options - - Non-invasive electronic rotation sensor to verify cleaner speed
- - Counter parts to the standard clamp connections, including gaskets and clamp rings
Dimensions (mm) 
Dimensions for options: * For welding end: 65/99 mm (2.5/4 inch)
** For DIN DN100: 234 mm (9 inch) Flow Rate 
Rotating Speed 
| 
